Budget
Our total spending for this project is here. For this project, we were limited to $250. Though we went over-budget, we already had our microcontrollers so we only actually spent $237.
| Item | Obtained Free? | Cost per Unit | Quantity | Shipping | Estimated Spent |
|---|---|---|---|---|---|
| Logitech C270 | no | 17.00 | 2 | 0 | 34.00 |
| NERF Barricade | no | 26.54 | 1 | 0 | 28.54 |
| Servos | no | 10.95 | 2 | 0 | 21.90 |
| MDF | no | 7.96 | 1 | 0 | 7.96 |
| Pololu motors | no | 2.25 | 2 | 14.95 | 19.45 |
| Meishel Motors | no | 3.00 | 2 | 8.26 | 14.26 |
| HobbyKing Servos | no | 3.27 | 2 | 8.10 | 14.64 |
| 18 Dart Clip | no | 9.94 | 1 | 0 | 9.94 |
| Ball Bearings | no | 6 | 4 | 0 | 24 |
| Acrylic Sheet | no | 33.85 | 1 | 0 | 33.85 |
| Gorilla Glue Epoxy | no | 5.47 | 4 | 1.03 | 22.91 |
| Loctite Glue | no | 4.98 | 1 | 0.65 | 5.63 |
| Teensy3.6 | yes | 25.00 | 1 | 0 | 25.00 |
| Uno clone | yes | 9.00 | 1 | 0 | 9.00 |
| Total | 271.08 |